IN/OUT Connector: 15 pin high-density female D-sub Video: Analogue RGB, 0.7Vp-p nominal Sync: Horizontal and vertical, for TTL level OUT/IN Connectors: 5 x 75 ohm insulated BNC's Video: Analogue RGB, 0.7Vp-p nominal Sync: Separate horizontal and vertical connectors RGB Bandwidth: >1000MHz GENERAL Power: None required Features: Bidirectional, 1:1 RGB shielding & signal integrity maintained throughout. I/O connectors on opposite faces. Strongly constructed. Included: 1 x HQ0K4 high-density 15pin D-sub male-male cable Dimensions: (W x D x H) 85.5 x 62 x 31mm overall Weight: 205g unit only

This very compact and strong bi-directional adaptor allows standard 75 ohm BNC cables to be used to connect to VGA inputs and outputs on PC's, Macs, projectors, and other equipment such as our VGS2 splitter. The DB95 is supplied with a 400mm male-male VGA cable (HQ0K4) and can also be directly attached to our off-the-shelf HQ cables for maximum versatility and installation convenience. This fully shielded passive adaptor has mega-bandwidth and requires no power. The RGBH&V signals are passed through 1:1.

Quest AV model DB95 VGA to five BNC’s adaptor

DB95 $79.95 plus GST Packing & Delivery are not included